Leading Innovation in Fiber Connectivity and Cable Management Solutions
As the demand for broadband data explodes, companies across today’s telecom ecosystem need a trusted, highly responsive partner that brings together end-to-end network knowledge and global experience to help increase installation speed, simplify network complexity, and lower lifetime cost. TE Connectivity listens to customers and quickly develops smart connectivity solutions that help them design, deploy and upgrade networks that are more competitive today – and ready for what’s next.
As the leader in broadband connectivity, TE Connectivity makes it possible for massive volumes of data to move efficiently and reliably, so a whole world of information can move seamlessly from origination to destination—from the data center, to the desktop, the chip and right to the device in the palm of your hand—and back.
Fiber Optic Gel Sealed Splice Enclosure (1)
(FOSC 600) Fiber Optic Splice Closures are a family of larger-sized closures for use in all outside plant splicing applications, with primary focus on backbone/feeder and closure rehabilitation applications. Utilizing compressed gel cable sealing and a latched-shut case, FOSC 600 closures are available in 2 sizes, each in either a butt (single ended) or in-line closure style and capable of handling a range of cable styles and sizes.
Fiber Optic Heat Shrink Flame Retardant Splice Closure (2)
(FOSC 400 FR) FOSC 400 Flame Retardant Fiber Optic Splice Closures are made with a flame retardant material and designed for use for applications in cable vaults and equipment (non-residential) buildings. Available in B4 and D5 sizes, FOSC 400 Flame Retardant closures utilize heat shrink cable entry sealing, and a dome to base clamp for quick access to the splice chamber.
Fiber Optic Gel Sealed Splice Closure (3)
(FOSC 450) Fiber Optic Splice Closures are a family of closures for use in all outside plant fiber splicing applications. Utilizing compressed gel cable sealing and a quick release dome-to-base clamp for fast access to the splicing area, there are a variety of sizes to choose from, each capable of handling a range of cable styles and sizes, and incorporating such features as hinging splice trays. FOSC closures are accompanied by a full line of accessories as well.
CWDM Modules (4)
(OCMX-C) The coarse wavelength division multiplexer combines (or multiplexes) two or more signals with different wavelengths in one common fiber. The same components can also be used to separate the wavelengths (de-multiplexing) at the remote location. The OCM modular packaging provides a robust and simple method for integrating these devices into your network. The OCMF high density modules are designed to increase wavelength capacity in a thinner LGX style module.
DWDM Modules (5)
(OCMX-D) The dense wavelength division multiplexer combines (or multiplexes) two or more signals with different wavelengths in one common fiber. The same components can also be used to separate the wavelengths (de-multiplexing) at the remote location. The OCM modular packaging provides a robust and simple method for integrating these devices into your network.
Indoor/Outdoor Customer Premises Enclosures (6)
(FibrBoss CB) Wall-mountable indoor/outdoor customer termination enclosures provide mechanical and environmental splice and patch protection for both the fiber and its components and permits appropriate access to the connectors while maintaining the highest standards of fiber management. CB boxes are typically used at the customer’s premises in the termination part of the access network.
Fiber Distribution Frames (A)
(NGF) Fiber Distribution Frames provide a high density, modular solution for building lineups in a fiber optic facility. Each frame option is designed with an emphasis on superior cable management and ease of use, and provides ample trough space for cable and jumpers, easy access to connectors, and storage for jumpers.
NG4access
TE’s new NG4access ODF platform addresses the cable management challenges of today’s high density environments while balancing industry-leading fiber termination density with circuit accessibility. From minimizing your labor requirements, to faster deployment and delivery, the NG4access ODF was designed with innovation and accessibility in mind.
LSX
LSX Fiber Distribution Frame products are designed to be compatible with the Lucent (LGX) 7-inch system. The LSX system incorporates industry-best cable management features and benefits found in standard 8-inch systems.
Fiber Wall Boxes (B)
(Indoor and Outdoor) Fiber Wall Boxes are available a variety of one and two door wall mount configurations. Products are designed specifically to act as part of the fiber distribution system as the demarcation point for the service provider at the customer location.
Rapid Fiber Panels (C)
Rapid Fiber Panels products are generally used in situations when fiber counts are less than 400. The line contains flexible solutions for wall, cabinet and rack mounting. In the case of rack mounting solutions, splicing is generally done on frame. All FOP products are designed for: maximum bend radius protection, intuitive cable routing paths, easy cable and connector access and physical protection.
Value-Added Modules (D)
(D/CWDM, Monitor, Splitter) Value-added modules, or VAMs, add flexibility and functionality to the optical transport system by enabling telecommunications service providers to easily incorporate optical components into the network. VAM components are comprised of splitters, monitors, multiplexers, and fit into existing optical distribution frames and other mounting environments.
Fiber Management Raceway System (E)
The Fiber Management Raceway System is designed to protect and route fiber optic patch cords and multi-fiber cable assemblies between network elements and optical distribution frame areas. Available in multiple sizes from 2X2 to 4X24.
Fiber Cable Assemblies (F)
(Indoor and Outdoor) Fiber cable assemblies and accessories are designed to meet the demands of indoor/outdoor customer applications. From patch cords, multifiber assemblies and connectors to adapters and attenuators, the fiber cable product family exceeds service provider requirements for today’s high-speed networks.
Ethernet Patch Panels (G)
Ethernet Patch Panels are manufactured in 24-port (1RU) or 48-port (2RU) configurations to provide high-density modular patching solutions for all high-density applications where space is limited. The LSA-PLUS® IDC technology provides a secure, reliable and gas-tight connection and allows for the wire to be terminated with either a KRONE® insertion tool or a 110 termination tool.
Copper Cable (H)
Copper Cable solutions are designed to maximize network performance and system uptime with integrated strain relievers that prevent cable from moving at the termination point. The unique manufacturing process compacts copper strands into a uniform circular shape, resulting in a patch cord with the flexibility of a stranded cord and the durability of a solid cord.
DS1 and DS3 Panels (I)
The DS1 and DS3 products are the next generation of fixed-circuit DSX panels. With product innovations like higher density, and a technician-friendly design, the DS1 and DS3 panels add value and confidence to networks. The panels are available in numerous configurations and sizes to meet individual needs and are economically priced to create an excellent return on investment.
Power Distribution Panels (J)
Power Distribution Panels have been engineered from the ground up to properly protect and distribute power to valuable, revenue generating network equipment. Flexible configurations suit almost every network application and the platform sets a new standard for delivering the power and protection that service providers need. Power Distributions Panels meet the industry’s most stringent standards, including NEBS Level 3.
VIEW TE CONNECTIVITY PRODUCTS